Biocop TF Pint Paint Additive Booster

If you desire the ultimate in antifoulant performance, then add one Sea Hawk Biocop TF Pint to every gallon of bottom paint. Biocop TF Pint is a bottom paint additive loaded with zinc omadine biocide that will add extra protection against the harshest marine environments and help control soft growth.

**NOTE: Biocop TF Pint Paint Booster may only be used as a bottom paint additive in the following products: AF-33, Cukote, Sharkskin, Talon, and Tropikote.

You may also add it to Mission Bay and Smart Solution, but please note that Biocop TF does contain copper and should not be added to those bottom paints ifyou intend on bottom painting an aluminum surface.

Adding Seahawk Biocop TF Pint to any antifouling paints other than those listed above will result in incompatibility and may cause the antifoulant to chemically react causing it to become unusable.

Make sure to add Biocop TF Pint to the bottom paint just before you are ready to paint, and apply the bottom paint within 2 hours after you add Biocop TF Pint to the bottom paint.

TIP: Remember to add only the amount of Biocop TF Pint to the bottom paint to apply one coat of paint. If you have a 19ft boat and are using 1 gallon of bottom paint and 1 pint of Biocop TF Paint Additive, you will want to pour half of the gallon of bottom paint into another container, and then add half the paint additive which would be enough for the 1st coat. Use the remainder and mix together when you are ready to apply the 2nd coat.

Use 1 Pint of Biocop TF Bottom Paint Additive to One Gallon of Bottom Paint

This product was formerly BioBoost.