Partall Film #10 PVA Surfacing Agent For Gel Coat

Use this product as a surfacing agent when using Gel Coat without wax additive.
Partall Film #10 is a polyvinyl alcohol (PVA) water/alcohol solution of water-soluble, film-forming materials. This parting film is particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces. It is not recommended for use with resins containing water or giving off water during cure (i.e., phenolics) or with automotive finishes, as damage may occur.
Partall Film #10 will not shrink and pull away from corners or curved surfaces. After resin has dried, the film parts easily from the mold and is readily dissolved from the molded parts with water. An occasional coating of Partall Paste #2 is required on most mold surfaces before application of Partall Film #10.May be applied over gel coat as a surface cure agent.

*ThisItemShips From FloridaClick to See Estimated Transit Times